- Home
- Industries
- Shopping Centers

Commercial Electricity for Shopping Centers in Texas
Shopping centers run common-area electricity that often costs more than owners expect, with CAM pass-throughs that depend on how clean the billing structure is. The right contract fits the lease book and the hold strategy for each asset.
Energy strategy for Texas shopping centers
Shopping centers are commercial real estate assets where most tenants pay their own electricity directly, but the owner carries meaningful common-area load that affects both the P&L and the CAM reconciliation with tenants. Because almost all of it passes through to tenants through CAM, procurement savings help tenant occupancy cost more than owner NOI, but they still matter for leasing competitiveness.
This guide covers how shopping center electricity load works, how CAM pass-through affects procurement strategy, how multi-center portfolios use aggregation leverage, and how Electric Decisions runs a documented procurement for shopping center owners and operators. Built for strip center owners, power center operators, lifestyle center operators, grocery-anchored center owners, and shopping center REITs across Texas.
How shopping centers use common-area electricity
Shopping center electricity splits into tenant load (which tenants pay directly) and common-area load (which the owner pays and typically passes through to tenants via CAM).
Parking lot lighting is a large share of common-area load. Large retail parking lots run around the clock with reduced levels overnight, which creates sustained baseline load. LED retrofit is one of the highest-return capital projects available for shopping centers.
Common area HVAC applies to enclosed mall common areas, lifestyle center amenity spaces, and some grocery-anchored center food courts. For open-air strip centers, this is minimal.
Signage, exterior accent lighting, and amenity areas account for the remainder along with security systems, cameras, fountains, decorative lighting, and holiday lighting.
Pad site considerations vary by center. Freestanding pad sites (restaurants, banks, dry cleaners) typically have their own meters and REP contracts, so the center owner is not procuring for them. Inline tenants in strip centers often have their own meters too, though some older centers still have single-master-meter configurations with submetering.
CAM pass-through and the procurement decision
The single most important input to a shopping center electricity procurement decision is the CAM pass-through structure.
Standard shopping center lease: Common-area utilities are included in CAM, which the tenant reimburses on a pro-rata basis typically monthly or quarterly, with an annual reconciliation. Procurement savings on common-area electricity flow to tenants through lower CAM reconciliation, improving their occupancy cost and the center's leasing competitiveness.
Anchor tenant arrangements: Many anchor tenants (large grocers, big-box retailers, department stores) have negotiated caps on CAM contribution or separate direct metering. Procurement savings may or may not flow proportionally to anchor tenants depending on the specific lease.
Pad site tenants: Typically metered separately and not part of common-area CAM. Procurement for the owner is on the center's own meter only.
Submetered inline configurations: Some older centers run a master meter and submeter individual tenants. The owner pays the full bill and bills tenants back based on submeter readings. Procurement savings flow back through submetered billing.
Procurement strategy should reflect the actual lease book. For centers with anchor tenants and pad sites all separately metered, the owner's procurement is a smaller, focused common-area account. For centers with master-meter configurations and submetering, the owner is effectively procuring on behalf of the tenants and the pass-through accuracy matters more.
What drives your monthly bill
The number on your shopping center common-area bill is not one price. It is a stack of charges.
The energy charge is the per-kWh number suppliers quote. Under a typical fixed-rate contract, this is the only piece that is actually locked.
TDSP delivery charges cover poles, wires, transformers, and metering. Regulated.
Demand charges matter for shopping centers with large peak draw from mall HVAC or heavy daytime common-area load. For most strip centers, demand charges are modest because common-area load is dominated by steady lot lighting.
4CP transmission applies to larger shopping centers (roughly 700 kW peak and above). Most strip centers do not hit this threshold on common-area load alone, but large enclosed malls, power centers with concentrated common HVAC, and portfolios on consolidated metering sometimes do.
Regulatory, fees, and taxes cover PUCT assessments, ERCOT fees, gross receipts tax, and sales tax.
For a plain-English walk-through of how commercial electricity gets billed, see the commercial electricity pillar guide.
Contract decisions that move the number
Three decisions do most of the work on a shopping center electricity contract.
Term length: Most Texas shopping centers land on 24 or 36 month fixed-rate terms. Owners with near-term sale plans should align term with hold strategy to avoid creating an assumable obligation.
What is actually fixed: A fixed-rate contract often lets delivery charges, 4CP, regulatory pass-throughs, and supply-side demand charges float. For CAM accuracy, having well-defined pass-through treatment matters because tenants ultimately see the number.
Bandwidth: Your contract assumes a usage range. Adding or losing anchor tenants, repositioning, redevelopment, or significant tenant improvement activity all change usage.
The Texas early termination fees guide covers ETF structuring, which matters here because of ownership transition risk.
Portfolio owners and shopping center REITs have real leverage
Multi-center owners and shopping center REITs have a procurement advantage that single-center owners do not: aggregated load. Suppliers price a combined portfolio more aggressively because the volume is easier to hedge.
Coordination questions:
- Renewal cohorts: Larger portfolios typically stagger renewals.
- TDU zone coverage: Statewide portfolios span multiple utility zones. The Texas Retail Electric Providers directory lists which suppliers actively bid each zone.
- Add-a-site and divest language: REITs actively acquiring or disposing need a clean mechanism for both directions.
- Center format mixing: Strip centers, power centers, and lifestyle centers have different common-area load profiles.
- Submetered vs direct-tenant configurations: Mixed books need procurement that reflects the actual meter configuration.
Where your shopping center sits
Texas has four investor-owned TDUs plus municipal utilities. Oncor covers North Texas including the DFW retail corridor. CenterPoint covers Greater Houston. AEP Texas and TNMP cover other regions. Austin Energy and CPS Energy are municipal utilities. See the Plano commercial electricity page for a high-density retail corridor example.
Where shopping center owners overpay
Letting the contract roll to month-to-month. Holdover rates run well above market and flow through to tenants in next year's CAM reconciliation, which creates tenant disputes on top of the overpayment itself.
- Signing a term that outlives the hold: A 36-month contract on a center you plan to sell in 18 months creates an assumable obligation.
- Comparing only cents per kWh: For CAM accuracy, pass-through treatment matters.
- Not aligning renewal with CAM reconciliation: A mid-cycle rate change can create tenant communication issues at reconciliation time.
- Ignoring LED retrofit timing: Parking lot LED retrofit is one of the highest-return capital projects for shopping centers. If retrofit is on the near-term plan, model post-retrofit usage into the contract bandwidth.
Timing the renewal
Start before contract expiry. For a single center, three to six months of runway is enough. For a portfolio or an enclosed mall, six to nine months is safer.
The single most avoidable mistake is starting in the final 30 days.
How Electric Decisions runs a shopping center procurement
Five documented steps. Same process on a single strip center, same process on a 30-center portfolio.
Step 1: Intake: We pull your last 12 months of usage from the TDU through a Letter of Authorization and profile every meter, flagging the common-area vs tenant-metered split.
Step 2: Reference: We benchmark your current all-in cost against the live ERCOT forward curve.
Step 3: Competition: We run an identical-specs RFP against the suppliers who bid your zone competitively.
Step 4: Contract: We red-line the paperwork in plain English. ETF, bandwidth, material change clause, pass-through caps, holdover language, CAM alignment.
Step 5: Execution: We manage the switch and watch the market through your term.
Our margin is disclosed in writing before you sign.
Shopping Centers energy questions, answered.
What buyers in this sector actually ask before a renewal.
Energy strategy across sectors. Read the pillar, then dive into the verticals next door.

See what your shopping center actually pays against the market
Upload your last electricity bill and we will benchmark your rate against the live ERCOT forward curve for your zone and term. No obligation, no supplier call until you ask.